If your images are coming out very bright, this is likely due to the camera settings being set to manual.
If your videos look like the picture below, this is most likely due to the cameras settings being incorrectly configured.
To remedy this:
1. Turn the camera on with the power button on the side
2. Ensure the recording mode is on Timelapse (clock symbol at the bottom of the screen) - if it is in a different mode (eg video mode) please change it to Timelapse
3. Swipe right to left to open the lens settings
4. Ensure that the +/- setting is set to Auto
Insta360 One X2
+/- = Auto
EV = 0
WB = Auto
Colour = Standard
This should get the video brightness back to normal for your next scan.
Last updated: 06/01/22